Loading ...
Loading ...
Loading ...
MENU LIST
CP88/CP73 Owner’s Manual
30
Control Panel
Keyboard/
Pedal
Sustain Pedal Type
Determines which type of foot switch connected to the FOOT SWITCH
[SUSTAIN] jack is recognized. Select “FC3A (HalfOn)” when you wish to use
half-damper playing techniques.
Settings: FC3A (HalfOn), FC3A (HalfOff), FC4A/FC5
Default: FC3A (HalfOn)
Foot Switch Assign
Determines the Control Change number generated by using the Footswitch
connected to the FOOT SWITCH [ASSIGNABLE] jack. Keep in mind that if
the same MIDI Control Change messages set here are received from an
external device, the internal tone generator also responds to those messages as
if the Footswitch of the instrument itself was used.
Default: Live Set +
Local Control
Determines local control on and off. When “Off” is selected, this instrument’s
tone generator is essentially disconnected from its controllers, and no sound
will be produced in response to playing of the keyboard. This instrument
does, however, continue to transmit MIDI messages when “Local Control” has
been set to “Off,” and the tone generator will continue to produce sound in
response to received MIDI messages.
Default: On
USB Audio Volume
Determines the output level of the USB Audio.
Settings: 0 – 127
Default: 64
Auto Power Off
Determines whether to set the Auto Power Off function to “Enable” or
“Disable.”
Default: Disable
Function name Description
Panel Lock Settings Live Set
Determines whether to enable (On) or disable (Off) the panel lock for each of
the categories listed at left.
Default: On
Piano/E.Piano/Sub
Delay/Reverb
Master EQ
Display Lights Section
Determines whether or not the lighting of the indicator lamps for the Piano,
Electric piano, Sub, Delay, Reverb sections is linked with each section’s [ON/
OFF] switches. When “Off” is selected, the corresponding lamps are linked
with each of the [ON/OFF] switches; when “On” is selected, the indicator
lamps will always be lit. When “MIDI Control” is set to “On,” the transmit/
receive settings of control change messages will be changed according to the
state of the indicator lamps (page 28).
Default: Off
Ins Effect
Determines whether or not the lighting of the indicator lamps of insertion
effects contained in Voice sections is linked with each Insertion effect’s [ON/
OFF] buttons. When “Off” is selected, the corresponding indicator lamps are
linked with each of the [ON/OFF] buttons; when “On” is selected, the
indicator lamps will always be lit.
Default: Off
Function name Description
Loading ...
Loading ...
Loading ...