Loading ...
Loading ...
Loading ...
Using with a Computer
CP88/CP73 Owner’s Manual
27
USB Audio receiving/sending capability for the
instrument is a maximum 2 channels (1 stereo channel)
at a sampling rate of 44.1 kHz. The input signal from the
USB [TO HOST] terminal is output via the OUTPUT
[L]/[R] jacks (XLR type connector), the OUTPUT [L/
MONO]/[R] jacks and the [PHONES] jack.
The input level can be adjusted from the [MENU] button
→ “General → “USB Audio Volume.”
The audio signal output via the USB [TO HOST]
terminal is identical to the audio signal output via the
OUTPUT [L]/[R] jacks (XLR type connector), the
OUTPUT [L/MONO]/[R] jacks, and the [PHONES]
jack.
NOTE
The audio signal input via the INPUT [L/MONO]/[R] jacks is
output only from the OUTPUT [L]/[R] jacks (XLR type
connector), the OUTPUT [L/MONO]/[R] terminal, and the
[PHONES] jack of this instrument, and is not sent via the USB
[TO HOST] terminal.
Connecting an iPhone or iPad
NOTE
In order to eliminate the risk of noise from other communication
when using this instrument with an iPad or iPhone app, be sure
to turn on Airplane Mode and then turn on Wi-Fi.
NOTICE
Be sure to place your iPad or iPhone on a stable surface to
prevent it from falling over and being damaged.
Apps compatible with this instrument provide many
more convenient and creative ways to enjoy music with
it. For details on how to connect the devices, refer to the
“iPhone/iPad Connection Manual,” which is available
from the Yamaha website.
iPhone/iPad Connection Manual
This is downloadable from the Yamaha Downloads
website:
http://download.yamaha.com/
Details of compatible smart devices and apps can be
found on the following page at the Yamaha website.
http://www.yamaha.com/kbdapps/
Precautions when using the USB [TO
HOST] terminal
When connecting the computer to the USB [TO
HOST] terminal, make sure to observe the following
points. Failing to do so risks freezing the computer
and corrupting or losing the data. If the computer or
the instrument freezes, restart the application
software or the computer OS, or turn the power to
the instrument off and then on again.
NOTICE
• Use an AB type USB cable. Do not use a USB 3.0
cable.
• Before connecting the computer to the USB [TO
HOST] terminal, exit from any power-saving mode of
the computer (such as suspend, sleep, standby).
• Before turning on the power to the instrument,
connect the computer to the USB [TO HOST]
terminal.
• Execute the following before turning the power to the
instrument on/off or plugging/unplugging the USB
cable to/from the USB [TO HOST] terminal.
- Quit any open application software on the
computer.
- Make sure that data is not being transmitted from
the instrument. (Note that even playing a key
causes data to be sent.)
• When making computer connections, make sure that
at least six seconds elapses between the time you
turn this instrument on/off and you connect/
disconnect the USB cable.
USB Audio
Loading ...
Loading ...
Loading ...