Loading ...
Loading ...
Loading ...
CP88/CP73 Owner’s Manual
24
Precautions when using the USB
[TO DEVICE] terminal
This instrument features a built-in USB [TO
DEVICE] terminal. When connecting a USB device
to the terminal, be sure to handle the USB device
with care. Follow the important precautions below.
NOTE
For more information about the handling of USB devices, refer
to the owner’s manual of the USB device.
Compatible USB devices
Only USB memory devices of the flash drive variety can
be used with this instrument. Furthermore, this
instrument does not necessarily support all
commercially available USB flash drives, and Yamaha
cannot guarantee normal operation with every such
device on the market. Before purchasing a USB flash
drive for use with this instrument, therefore, please visit
the following web page to confirm whether or not it is
supported:
http://download.yamaha.com/
Although USB devices 2.0 to 3.0 can be used on this
instrument, the amount of time for saving to or loading
from the USB device may differ depending on the type
of data or the status of the instrument.
NOTE
The rating of the USB [TO DEVICE] terminal is a maximum of
5V/500mA. Do not connect USB devices having a rating above
this, since they can cause damage to the instrument itself.
Connecting a USB device
When connecting a USB device to the USB [TO
DEVICE] terminal, make sure that the connector on
the device is appropriate and that it is connected in the
proper direction.
Formatting a USB flash drive
Certain types of flash drive must be formatted before
they can be used with this instrument. Whenever you
plug such a device into the USB [TO DEVICE]
terminal, and a “Connect USB device” message is
shown prompting you to format it, do so.
NOTICE
The format operation overwrites any previously existing
data. Make sure that the USB flash drive you are
formatting does not contain important data.
Write protection
To prevent important data from being inadvertently
erased, apply the write-protect provided with each USB
flash drive. If you are saving data to the USB flash drive,
make sure to disable write-protect.
Removing USB flash drives
Before removing a USB flash drive from the USB [TO
DEVICE] terminal, ensure that this instrument is not
currently accessing it in order to save, delete or load
data.
NOTICE
Make sure to avoid excessive repeated connecting/
disconnecting of USB flash drives. Failing to follow this
may cause this instrument to freeze and stop operating.
In addition, a USB flash drive should never be removed
before it has been fully mounted or while it is being
accessed by this instrument in order to load or save
data. Data on the USB flash drive or on the instrument
itself may be corrupted as a result of such action, and
there is also a danger that the USB flash drive could be
permanently damaged.
Loading ...
Loading ...
Loading ...