Loading ...
Loading ...
Loading ...
Installation
58
When the appliance is to be connected to
Natural Gas then the pressure regulator
supplied must be fitted to the gas inlet. A test
point (for checking the gas pressure) is
supplied either with the regulator or as a
separate fitting in the case of LPG
appliances.
Connecting to LPG
All the adjustments necessary to allow the
appliance to function correctly are made in
the factory. The only procedure required for
correct operation is connection of the hose
supplied with the appliance.
The appliance comes complete with a
rubber hose with pressure regulator and
connectors. The pressure regulator is preset
in the factory to ensure the appliance
functions to the highest standards.
Use a pressure regulator compatible with
EN regulations, making connection to the
gas canister following the guidelines set out
in the regulations in force.
The supply pressure must comply with the
values indicated in the table in “Gas types
and Countries”.
Type of LPG canisters
Various types of canisters can be used with
this appliance. It is, however,
recommended to use LPG canisters with the
characteristics indicated in the table.
For assembling or replacing the
hose (periodically check its
expiration date), you must refer to
the applicable regulations.
Improper use
Risk of explosion
• Handle the gas canister with care.
• Always use the canister holding it
vertically.
• Position the canister in an easily
accessible location to facilitate its
opening and closure.
• Keep the canister away from heat
sources.
Maximum load
(Kg)
H
(mm)
Ø
(mm)
10 600 270
15 650 315
Loading ...
Loading ...
Loading ...