Seat Ateca 2016

User Manual - Page 52

For ATECA 2016.

PDF File Manual, 336 pages, Read Online | Download pdf file

ATECA 2016 photo
Loading ...
Loading ...
Loading ...
The essentials
Z
one
B
: You can add oil but keep the level
in th
at
zone.
Zone
C
: Add oil up to zone
B
.
T
op
pin
g up engine oil
Unscrew cap from oil filler opening.
Add oil slowly.
At the same time, check the level to ensure
you do not add too much.
When the oil level reaches at least zone
B
,
u
n
s
crew the engine oil filler cap carefully.
Oil properties
Engine type Specification
Petrol without flexible service
interval
VW 502 00/VW 504
00
Petrol with flexible service in-
terval (LongLife)
VW 504 00
Diesel. Engines without Particu-
late filter (DPF)
VW 505 01/VW 506
01/VW 507 00
Diesel. Particulate Filter En-
gines (DPF).
With or without flexible service
interval (with and without Long-
Life)
a)
VW 507 00
a)
Only use recommended oils, otherwise you may damage the
engine.
Engine oil additives
No type of additive should be mixed with the
engine oil. The deterioration caused by these
additives is not covered by the warranty.
in Changing engine oil on page 290
page 288
Coolant
Fig. 61 Engine compartment: coolant expan-
s
ion t
ank
cap.
The coolant tank is located in the engine
c
omp
ar
tment
page 286.
When the engine is cold, replace the coolant
when the level is below .
Coolant specifications
The engine cooling system is supplied from
the factory with a specially treated mixture of
water and at least 40 % of the additive G13
(TL-VW 774 J), purple. This mixture gives the
necessary frost protection down to -25°C
(-13°F) and protects the light alloy parts of
the engine cooling system against corrosion.
It also prevents scaling and considerably rai-
ses the boiling point of the coolant.
To protect the cooling system, the percentage
of additive must always be at least 40 %,
even in warm climates where anti-freeze pro-
tection is not required.
If for weather reasons further protection is
necessary, the proportion of additive may be
increased, but only up to 60 %; otherwise an-
tifreeze protection will diminish and this will
worsen cooling.
When the coolant is topped up, use a mixture
of distilled water and at least 40 % of the
G13 or G12 plus-plus (TL-VW 774 G) additive
(both are purple) to obtain an optimum anti-
corrosion protection
in Topping up cool-
ant on p
ag
e 291
. The mixture of G13 with
G12 plus (TL-VW 774 F), G12 (red) or G11
(green-blue) engine coolants will significant-
ly reduce anti-corrosion protection and
should therefore be avoided
in Topping
up c
oo
l
ant on page 291.
50
Loading ...
Loading ...
Loading ...