Loading ...
Loading ...
Loading ...
Operation
is to provide the driver with a visual indica-
tion th
at
he or she shou
ld activate the dip-
ped beam.
WARNING
Heavy objects in the vehicle may mean that
the headlight
s dazzle and distract other driv-
ers. This could result in a serious accident.
●
Adjust the light beam to the vehicle load
status so that it does not blind other drivers.
Interior and reading lights
1)
›››
table on page 2
Read the additional information carefully
›››
page 25
Glove compartment and luggage compart-
ment lighting*
When opening and closing the glove com-
partment on the front passenger side and the
rear lid, the respective light will automatically
switch on and off.
Footwell lighting*
The lights in the footw
ell area below the dash
(driver and front passenger sides) will switch
on when the doors are opened and will de-
crease in intensity while driving. The intensity
of these lights can be adjusted using the ra-
dio menu (see Easy Connect > Light
Settings > Interior lighting
›››
page 27).
Ambient light*
The ambient lighting in the door panels may
change colour. The intensity of these lights
can be adjusted using the radio menu (see
Easy Connect > Light Settings >
Interior lighting ›››
page 27).
Note
The reading lights switch off when the vehi-
cle i
s locked using a key or after several mi-
nutes if the key is removed from the ignition.
This prevents the battery from discharging.
Visibility
S
u
n
visors
Fig. 139 Sun visor
Options for adjusting driver and front pas-
sen
g
er s
un visors:
●
Lower the sun visor towards the wind-
screen.
●
The sun visor can be pulled out of its
mounting and turned towards the door
››› Fig. 139
1
.
●
Swing the sun visor towards the door, lon-
git
udin
al
ly backwards.
1)
Depending on the level of equipment fitted in the
vehicl
e, LEDs can be used for the following interior
lights: front courtesy light, rear courtesy light, foot-
well light and sun visor light.
142
Loading ...
Loading ...
Loading ...