Seat Ateca 2016

User Manual - Page 22

For ATECA 2016.

PDF File Manual, 336 pages, Read Online | Download pdf file

ATECA 2016 photo
Loading ...
Loading ...
Loading ...
The essentials
Weight group
Seating position
Front passenger seat
a)
Rear side seat Rear central seat
b)
airbag on airbag off
Group 0 to 10 kg X U* U U
Group 0+ to 13 kg X U* U U
Group I 9 to 18 kg X U* U U
Group II 15 to 25 kg X UF* UF UF
Group III 22 to 36 kg X UF* UF UF
a)
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.
b)
For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
It is not compatible to install chairs in
this configuration.
Suitable for universal restraint systems
for use in this weight group.
Acceptable for front-facing universal-cat-
egory child restraint systems approved
for this mass group.
X:
U:
UF:
Seats without height adjustment should
be placed in their rearmost position.
Seats with height adjustment should be
placed in their rearmost and highest po-
sition.
*: The systems include the child restraint sys-
tem mounting with an upper retaining strap
(Top Tether) and lower anchoring points on
the seat.
in Safety instructions on page 83
“ISOFIX” and Top Tether child seat mounting system*
Child seats can be secured quickly, easily
and s
af
ely
on the rear outer seats with the
“ISOFIX” and Top Tether* system.
Two “ISOFIX” retaining rings are fitted on
each rear seat. In some vehicles, the rings
are secured to the seat frame and, in others,
they are secured to the rear floor. The “ISO-
FIX” rings are located between the rear seat
backrest and the seat cushioning Fig. 31.
The Top Tether* rings are located on the rear
part of the backrests of the rear seats (be-
hind the seat backrest or in the boot)
Fig. 32.
To understand the compatibility of the "ISO-
FIX" systems in the vehicle, consult the table
below.
20
Loading ...
Loading ...
Loading ...