Loading ...
Loading ...
Loading ...
Operation
children, animals and certain objects in all
situation
s.
●
The use of a number plate may interfere in
the views shown on the screen, since the
cameras' field of vision may be reduced.
●
The system will probably be unable to rep-
resent all areas clearly.
CAUTION
●
The c
amera im
ages are only two-dimen-
sional. Due to a lack of spatial depth, objects
that jut out or holes on the road, for example,
are more difficult to detect or may not be
seen at all.
●
In certain circumstances, the camera does
not capture objects such as beams, fences,
posts or thin trees, which could damage the
vehicle.
●
The system displays the auxiliary lines and
boxes regardless of the vehicle's environ-
ment, no objects are detected. The driver is
responsible for determining that the vehicle
will fit in the parking space.
CAUTION
In order to guarantee good system operation,
keep the camer
as clean, free of snow or ice,
and do not cover them with adhesives or oth-
er objects.
●
Never use abrasive cleaning products to
clean the camera lenses.
●
Do not use hot
or warm water to remove ice
or snow from the camera lenses. Doing so
could damage the lenses.
Area View system
Fig. 214 Display of the Area View system: aer-
i
al
view.
There are four different views to choose from:
Key to the Fig. 214:
Symbol Meaning
A
Front camera area
B
Right camera area
C
Rear camera area
D
Left camera area
Exit the current display.
Key to the Fig. 214:
Symbol Meaning
Three-dimensional views
Depending on the equipment: connect-
ing and disconnecting the ParkPilot
sound.
Setting the display: brightness, contrast
and colour.
The aerial view is generated by combining
the image
s from all the cameras
››› Fig. 214. The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
the different areas ››› Fig. 214
A
to
D
of the
aeri
al
view or the reduced aerial view.
Conditions necessary for the use of the Area
View system
●
The doors and the rear lid must be closed.
●
The image must be reliable and clear. For
this reason, for example, the camera lens
must be clean.
●
The area around the vehicle must be clearly
and totally visible.
●
The area for parking or manoeuvring
should be a flat surface.
●
The vehicle should not be loaded very
heavily at the rear.
●
The driver must be used to the system.
252
Loading ...
Loading ...
Loading ...