Loading ...
Loading ...
Loading ...
Air conditioning
The battery is located beneath a cover on the
b
ac
k
of the remote control.
●
To open the cover, lift it slightly at the bot-
tom and slide it down.
●
Remove the old battery.
●
Insert the new battery. When doing so, take
into account the polarity and use batteries of
the same type ›››
.
●
Replace the battery cover by inserting the
t
ab
s
at the top and pressing the bottom.
Range
The receiver is inside the vehicle. The remote
control, when fitted with new batteries, has a
range of several hundred metres. Obstacles
between the remote control and the vehicle,
bad weather conditions and discharged bat-
teries can considerably reduce the range of
the remote control.
CAUTION
●
The radio fr
equency remote control con-
tains electronic components. Therefore, avoid
getting it wet and exposing it to knocks or di-
rect sunlight.
●
The use of inappropriate batteries may
damage the radio frequency remote control.
For this reason, always replace the used bat-
tery with another of the same voltage, size
and specifications.
For the sake of the environment
●
Plea
se dispose of your used batteries cor-
rectly and with respect for the environment.
●
The remote control battery may contain
perchlorate. Observe the legal provisions re-
garding disposal.
●
Care should be taken so as not to operate
the remote control unintentionally so as to
prevent the auxiliary heater being switched
on accidentally.
Programming the auxiliary heater
Before pr
ogramming it, check that the vehi-
c
l
e's date and time are set correctly
›››
.
The aux
i
li
ary heater is programmed in the
Auxiliary heater menu of the infotain-
ment system.
Open the Auxiliary heater menu.
●
Press the button in the Climatronic
control panel.
●
Press the function button.
Function button: function
Switch off
: The auxiliary heater is immediately switched
off.
Function button: function
Heat
,
Ventilate
: Set to heat or ventilate the vehicle interi-
or when the auxiliary heater is switched on. By pressing
the function button
, you can select the desired
mode.
Set
: Opens the Auxiliary heater menu.
Departure time 1
,
Departure time 2
,
Departure time 3
:
Three different departure times (hh.mm) may be
programmed. If the auxiliary heater should only
be switched on a certain day of the week, this can
also be selected.
Duration
: The duration determines the operating
time of the auxiliary heater when switched on us-
ing the fast heating button
on the air condi-
tioning controls. The duration is also used to cal-
culate the departure time for the manual air con-
ditioner. It can be set between 10 and 60 mi-
nutes at 10-minute intervals.
This returns to the main menu.
The programmed departure time determines
the ap
pr
o
ximate time it should take to reach
the temperature set in the vehicle. The start
of the heating operation is determined auto-
matically depending on the outside tempera-
ture.
Checking the programming
When a departure time is activated and the
ignition is switched off the control lamp of
the fast heating button lights up for ap-
proximately 10 seconds.
»
167
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...