Loading ...
Loading ...
Loading ...
Advice
Operations prior to refilling
P
ark
the
vehicle on a flat surface. If the vehi-
cle is not parked on a flat surface, but, for ex-
ample, on a slope or on the side of a curb,
the level indicator may not detect the load
properly.
If a warning message about AdBlue
®
levels
appears on the dash panel display, fill at
least the minimum amount required (approx.
5 litres). Only after adding this amount will
the system detect that AdBlue
®
has been
added and you will be able to start the en-
gine again. The maximum amount that can
be refilled is 11 litres.
Switch the ignition off. If the ignition is not
switched off during refilling, the warning to
refill may continue to appear on the instru-
ment panel display.
Fill with a refill bottle
Only use AdBlue
®
that complies with ISO
22241-1. Only use original containers.
●
Open the fuel tank cover ››› Fig. 222.
●
Unscrew the tank cap by turning it in an an-
ti-clockwise direction.
●
Please observe the manufacturer's instruc-
tions, indicated on the refill bottle.
●
Check the expiry date.
●
Remove the cap of the refill bottle.
●
Insert the neck of the bottle in the tank fill-
er neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.
●
Press the refill bottle in the direction of the
filler neck and hold it in this position.
●
Wait until the contents of the refill bottle
have been poured into the AdBlue
®
tank. Do
not compress or break the bottle!
●
Turn the bottle in a counter-clockwise direc-
tion and gently pull it upwards ›››
.
●
The AdBlue
®
t
ank
i
s full when no more liq-
uid comes out of the bottle.
●
Screw on the tank cap in a clockwise direc-
tion until it is tightly closed.
●
Close the fuel tank flap.
Operations before driving
●
After refilling the tank, only switch on the
ignition.
●
Leave the ignition on for at least 30 sec-
onds for the system to detect the fluid load.
●
Make sure you wait for at least 30 seconds
before starting the engine!
Refilling AdBlue
Valid for vehicles with selective catalytic re-
duction.
●
Opening the cover to the tank filling neck.
●
Unscrew the SCR filling neck lock cap anti-
clockwise ››› Fig. 222.
●
Fill with AdBlue until the filling nozzle stops
the first time.
●
Close the SCR tube yourself, turning it
clockwise until you hear a click.
WARNING
AdBlue
®
should on
ly be stored in the original
container, which should be tightly closed and
kept in a safe place.
●
Never keep AdBlue
®
in empty food contain-
ers, bottles or other similar containers. Other
people may confuse it for other products.
●
Keep AdBlue
®
out of the reach of children.
CAUTION
●
When fillin
g, the handle of the filling noz-
zle must be pointing downwards. Otherwise,
the nozzle will not connect automatically.
●
Do not attempt to put more additive in after
the nozzle clicks the first time. The tank
could over overspill, with the AdBlue escap-
ing.
●
Only use AdBlue
®
that complies with ISO
22241-1. Only use original containers.
●
Never mix AdBlue
®
with water, fuel or addi-
tives. Any type of damage caused by such a
mixture will not be covered by the warranty.
●
Never pour AdBlue
®
into the fuel tank. This
could result in engine damage.
●
Do not carry the refill bottle inside the vehi-
cle. If there is a leak (due to temperature
284
Loading ...
Loading ...
Loading ...