Loading ...
Loading ...
Loading ...
English
29/30
Chapter
65
En
p This setting is available only when you
stop your vehicle in a safe place and apply
the parking brake.
CAUTION
Do not turn off the engine while restoring
the settings.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “System” screen appears.
3 Touch [Restore Settings].
4 Touch the item you want to
initialize.
All settings
Audio settings
p This setting is available when the selected
source is “OFF”.
Video settings
p This setting is available when the selected
source is “Disc”, “CD”, “Video CD” or
“DVD”.
Theme settings
Bluetooth settings
A message confirming whether to initialize
the settings appears.
p If you want to return settings or recorded
content to the default, touch [All
settings].
p Some of the settings configured on the
“Theme” setting will not be reset.
p The settings for iDatalink are not reset.
5 Touch [Restore].
When the selected item is successfully
initialized, a completion message appears.
p The source is turned off and the
Bluetooth connection is disconnected
before the process starts.
Precautions
Your new product and this
manual
Do not operate this product, any applica-
tions, or the rear view camera option (if
purchased) if doing so will divert your
attention in any way from the safe opera-
tion of your vehicle. Always observe safe
driving rules and follow all existing traffic
regulations. If you experience difficulty
in operating this product or reading the
display, park your vehicle in a safe loca-
tion and apply the parking brake before
making the necessary adjustments.
Do not install this product where it may
(i) obstruct the driver’s vision, (ii) impair
the performance of any of the vehicle’s
operating systems of safety features,
including airbags, hazard lamp buttons,
or (iii) impair the driver’s ability to safely
operate the vehicle. In some cases, it may
not be possible to install this product
because of the vehicle type or the shape
of the vehicle interior.
Important safeguards
WARNING
Pioneer does not recommend that you
install this product yourself. This product is
designed for professional installation only.
We recommend that only authorized Pioneer
service personnel, who have special training
and experience in mobile electronics, set up
and install this product. NEVER SERVICE
THIS PRODUCT YOURSELF. Installing or ser-
vicing this product and its connecting cables
may expose you to the risk of electric shock
or other hazards, and can cause damage to
this product that is not covered by warranty.
Connection
Precautions before connecting
the system
WARNING
Do not take any steps to tamper with or
disable the parking brake interlock sys-
tem which is in place for your protection.
Tampering with or disabling the parking
brake interlock system could result in seri-
ous injury or death.
CAUTION
Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger
compartment into the engine compart-
ment. If the yellow lead’s insulation tears
as a result of contact with metal parts,
short-circuiting can occur, resulting in
considerable danger.
It is extremely dangerous to allow cables
to become wound around the steering
column or shift lever. Be sure to install
this product, its cables, and wiring away
in such so that they will not obstruct or
hinder driving.
Make sure that the cables and wires
will not interfere with or become caught
in any of the vehicle’s moving parts,
especially the steering wheel, shift lever,
parking brake, sliding seat tracks, doors,
or any of the vehicle’s controls.
Do not route wires where they will be
exposed to high temperatures. If the
insulation heats up, wires may become
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse resis-
tor or filter, etc.) may fail to work properly.
Never feed power to other electronic
products by cutting the insulation of the
power supply lead of this product and
tapping into the lead. The current capac-
ity of the lead will be exceeded, causing
overheating.
Before installing this product
Use this unit with a 12-volt battery and
negative grounding only. Failure to do so
may result in a fire or malfunction.
To avoid shorts in the electrical system,
be sure to disconnect the (–) battery
cable before installation.
To prevent damage
WARNING
Use speakers over 50 W (output value)
and between 4 : to 8 : (impedance
value). Do not use 1 : to 3 : speakers
for this unit.
The black cable is ground. When install-
ing this unit or power amp (sold sepa-
rately), make sure to connect the ground
wire first. Ensure that the ground wire is
properly connected to metal parts of the
car’s body. The ground wire of the power
amp and the one of this unit or any other
device must be connected to the car
separately with different screws. If the
screw for the ground wire loosens or falls
out, it could result in fire generation of
smoke or malfunction.
Loading ...
Loading ...
Loading ...