Loading ...
Loading ...
Loading ...
27
Troubleshooting
PROBLEM EASY SOLUTION
The lid cannot be opened at
the end of the cooking cycle
•
Press the RELEASE button until all internal pressure is released and the
lid opens easily.
•
If this occurs frequently, the cooker may need to be adjusted to suit your
current altitude. Follow “Altitude Adjust” instructions on page 13.
‘Open Lid' is displayed on
the LCD when the lid is open
•
Turn the lid knob counter-clockwise as far as it will go. If the knob
won't turn, lower the lid to about 45° and turn it clockwise then
counter-clockwise.
Steam is escaping
from the lid
OR
Safety locking pin
does not rise
OR
Cooker is not getting
to pressure
OR
Timer will not count down
•
Assemble the lid correctly ensuring there is no gap between lid arm
and the stainless steel lid. The sealing nut should be screwed on tightly.
Follow step 5 on page 10.
•
Ensure the silicone gasket is clean, free from damage or cracks and is
properly inserted. Follow step 4 on page 10.
•
Ensure that the safety locking pin can move freely up and down. Follow
step 5a on page 25.
•
When the lid is locked, ensure the safety locking pin is properly aligned
within the opening of the lid arm. See step 7, page 16.
•
Ensure that the pressure release valve is properly seated in position and
facing the lid knob. Follow step 8 on page 17.
•
Add more liquid/food to the bowl. There should be a minimum of 1 quart
(1 liter) combined food and liquid.
•
If problem persists, call Breville Consumer Support.
The cooker automatically
switches to keep warm
without going through a
complete cooking cycle
•
Add more water to the cooking bowl and restart the cycle.
Water is collecting
on the countertop
•
Ensure the cooker is on a flat, level surface and that the condensation
drip cup is installed on the back of the cooker. Follow step 7 on page 11.
•
Empty the condensation drip cup.
Loading ...
Loading ...
Loading ...