Loading ...
Loading ...
Loading ...
INSTALLATION / USE & CARE
|
27
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be match lit
using the lighting rod stored in the drip tray.
Match-lighting your grill is done in one of three ways,
depending upon which burners are being lit.
First, make sure you’ve returned all of the control knobs to the
OFF position and have allowed 5 minutes for any accumulated
gas to dissipate before attempting to match light a burner.
Manual Lighting Tube
Your grill features individual manual lighting tubes for all main
burners except for the right-most main burners.
Using the lighting rod, place a lit match in front of the manual
lighting tube for the burner you wish to light. (See photo)
Push and turn the corresponding burner control knob to “LITE”.
If the burner doesn’t light within 5 seconds turn the knob o
and wait 5 minutes before attempting to light it again. Once lit,
gas will stop owing through the manual lighting tube.
Right-Most Main Burner
The right-most main burner does not feature a manual lighting
tube.
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate into the front slot of the bri-
quette tray for that burner.
Push and turn the corresponding burner control knob to “LITE”.
If the burner doesn’t light within 5 seconds turn the knob o
and wait 5 minutes before attempting to light it again.
ProSear™ Burner
The ProSear™ burner does not feature a manual lighting tube.
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate and through the protective
screen.
Push and turn the corresponding burner control knob to “LITE”.
If the burner doesn’t light within 5 seconds turn the knob o
and wait 5 minutes before attempting to light it again.
PREHEATING
Pre-heating your grill every time you use it is extremely im-
portant. Pre-heating allows the briquettes to properly heat up,
providing more even and more consistent cooking results.
Pre-heat your grill by igniting all main burners, including the
ProSear™ burner, and setting them to “HI”.
...
co
n
t
in
u
e
d
Extremely cold temperatures may cause your
ProSear™ burners to light inside the burners
instead of outside. Once lit, if you hear a ‘whooshing’
sound, immediately turn the burner knobs o to
extinguish the ame and then imme-
diately re-light the burners.
COLD WEATHER WARNING:
PROPANE
Loading ...
Loading ...
Loading ...