Loading ...
Loading ...
Loading ...
41
DIAGNOSTICS
HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by
the call center, no more than one inch from (but not touching) the machine.
NOTE: Do not press any other buttons or turn the cycle selector knob.
PUSH and hold the TEMP button while continuing to hold your phone to the
POWER button.
LISTEN for two beeps. After you hear the two beeps, release the TEMP button. Keep the
phone in place until the tone transmission has nished. The display will count down the time.
Once the countdown is over and the tones have stopped, resume your conversation with
the technician, who will then be able to assist you in using the information transmitted for
analysis.
Should you experience any problems with your dryer, it
has the capability of transmitting data via your telephone
to the Diagnostics Team. This gives you the capability
of speaking directly to our specially trained technicians.
The technician records the data transmitted from your
machine and uses it to analyze the issue, providing a fast
and e ective diagnosis.
If you experience problems with your dryer, call
1-844-553-6667
. Only use the Diagnostics feature
when instructed to do so by the Diagnostics Team. The
transmission sounds that you will hear are normal and
sound similar to a fax machine.
Diagnostics cannot be activated unless your dryer is
turned on by pressing the POWER button. If your dryer
is unable to turn on, then troubleshooting must be done
without using Diagnostics.
NOTE:
For best results, do not move the phone while the tones are being transmitted.
If the call center agent is not able to get an accurate recording of the data, you may be
asked to try again.
Pressing the POWER button during the transmission will shut o Diagnostics.
USING DIAGNOSTICS
First, call 1-844-553-6667. If the number of the phone you are using is on le and is asociated with your dryer, you will
be quickly relayed to a Diagnostics Team agent. Follow the technicians instructions and perform the following steps
only when requested to by the Diagnostics Team agent.
1 in.
(2.5 cm)
Loading ...
Loading ...
Loading ...