Loading ...
Loading ...
Loading ...
Cleaning and maintenance en
47
10.Put the pump cover back on and
screw it in. The grip must be vertical.
11.Refit the toe kick.
Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into compartment II and start the
Drain/Empty programme.
The drain hose at the siphon
is blocked
1. Switch off the appliance. Pull out the
mains plug.
2. Undo the hose clamp. Carefully
remove the drain hose. Be aware
that any remaining water may leak
out.
3. Clean the drain hose and siphon
connecting piece.
4. Re-attach the drain hose and secure
the connection point using the hose
clamp.
Filter in the water supply
blocked
Relieve the water pressure in the
supply hose first:
1. Turn off the tap.
2. Select any programme
(except Rinse/Spin/Empty).
3. Start the programme.
4. Allow the programme to run for
approximately 40 seconds, then
switch off the appliance.
5. Pull out the mains plug.
Then clean the filter:
1. Disconnect the hose from the tap.
2. Clean the filter with a small brush.
Loading ...
Loading ...
Loading ...