Loading ...
Loading ...
Loading ...
en Positioning and connecting
20
■ to the appliance
Model: Standard and AquaSecure
Note: Carefully turn on the tap and
check that the connection points are not
leaking. Screwed connections are under
pressure from the water supply pipe.
Water outlet
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
(e.g. when draining hot water into a
washbasin).
Do not reach into the hot water.
Caution!
Water damage
If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:
■ The plug does not block drainage
from the washbasin.
■ The end of the drain hose is not
immersed in the drained water.
■ The water drains away quickly
enough.
Note: Do not kink the water drain hose
or put strain on it lengthways.
Connection to a siphon
Height difference between the
installation area and the drain
■ for AquaSecure and standard
models, min. 60 cm - max. 100 cm,
■ for AquaStop models 0 -
max. 100 cm.
Levelling
Incorrect alignment may result in loud
noises, vibration and the machine
"wandering".
All four of the appliance's feet must
stand firmly on the ground. The
appliance must not wobble.
Use a spirit level to check that the
appliance is level and aligned correctly.
If necessary, you can amend the
alignment of the appliance by adjusting
its feet.
The appliance must not touch the side
panels of the cabinets it is between.
The lock nuts on the appliance's front
feet must be firmly tightened against the
housing using a WAF17 spanner.
Loading ...
Loading ...
Loading ...