Loading ...
Loading ...
Loading ...
en Operating the appliance
40
Note: Do not use the measuring aid for
gel detergents and washing powder, for
programmes with a prewash cycle or
when the "Ready in" time has been
selected.
On models without a measuring aid,
pour the liquid detergent into an
appropriate dosing ball and place this in
the drum.
Start the programme
Press the I button. The indicator lamp
will light up and the programme will
start.
The display panel and timeLight show
the "Ready in" time while the
programme is running, or the
programme length plus the programme
progress symbols once the wash cycle
has started.
Display panel ~ Page 31
timeLight ~ Page 29
Note: Foam detection
If the o symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next washing
cycle with the same load.
If you want to lock the programme to
prevent it from being adjusted
inadvertently, you can select the
childproof lock as follows.
Childlock
(w 3 sec.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock when the
program has started.
To activate/deactivate, press and hold
the Spin speed and Ready in buttons at
the same time for approx. three
seconds.The w symbol appears in the
display panel.
■ w lights up: The childproof lock is
active.
■ w flashes: The childproof lock is
active and the program selector has
been adjusted.To deactivate the
childproof lock, reset the program
selector to the initial program. The
symbol lights up again.
Note: To avoid the program to
terminate, do not turn the program
selector beyond the Off position.
Note: The childproof lock remains
active after the program has ended and
the appliance is switched off. You must
always deactivate the childproof lock if
you want to start a new program.
Adding laundry
Following the start of the program, you
can add or remove laundry as required.
Press the I button to do this.
The I button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
■ the Œ symbol disappears, and
adding is possible.
■ the Œ symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button I.The program continues
automatically.
Loading ...
Loading ...
Loading ...