Loading ...
Loading ...
Loading ...
Operating the appliance en
41
Notes
■ Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■ The load display is not active during
reloading.
Changing the programme
1. Press the I button.
2. Select another program.
3. Press the I button.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the I button.
2. To cool down laundry: Select Rinse.
3. Press the I button.
For programs at low temperature:
1. Press the I button.
2. Select Spin.
3. Press the I button.
Programme end during rinse
hold
- - - 0 appears in the display panel
and the indicator lamp of the I button
flashes.
Continue the program by:
■ Pressing the I button or
■ Selecting a spin speed or setting the
program selector to Spin and then
pressing the I button.
Programme end
End appears in the display panel and
the indicator lamp of the I button is
off.
The end of the programme will also be
displayed on the floor if:
■ timeLight (visual display) has been
activated and is visible.
■ Energy-saving mode has not been
activated. ~ Page 13
Removing laundry/switching
off the appliance
1. Open the door and remove the
laundry.
2. Turn the programme selector to Off
$. The appliance is now switched
off.
3. Turn off the tap.
Note: Not necessary on AquaStop
models.
Notes
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
■ Always wait until the programme has
ended, as the appliance could still
be locked. Then switch the
appliance on and wait for it to
unlock.
■ If the display panel goes off at the
end of a programme, energy-saving
mode has been activated. Press any
button to activate the panel.
Loading ...
Loading ...
Loading ...