Loading ...
Loading ...
Loading ...
37Care & Cleaning
Replacing LED Lights
Both the freezer and fresh food compartments of
your refrigerator include LED lights. Always use
Electrolux parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator’s power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and pull
the connector with the other hand while
pressing the connector latch.
4 Replace LED light and snap in place
assuring the light is facing in toward the
unit (inside fresh food and freezer) or facing
outward on bottom of fresh food doors.
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online
at www.electroluxicon.com, or through the dealer
where you bought the refrigerator.
LED Light Harness Removal
LED Light Removal
NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.
Occasion Tips
Short
Vacations
• Leave refrigerator operating during vacations of three weeks or less.
• Use all perishable items from refrigerator compartment.
• Turn automatic ice maker off and empty ice bin, even if you will only be
gone for a few days.
Long
Vacations
• Remove all food and ice if you will be gone one month or more.
• Turn the cooling system off (see “Controls” section for location of On/Off
button) and disconnect power cord.
• Turn off automatic ice maker and turn water supply valve to closed
position.
• Clean interior thoroughly.
• Leave both doors open to prevent odors and mold build-up. Block doors
open if necessary.
Moving
• Remove all food and ice.
• If using handcart, load from side.
• Adjust rollers all the way up to protect them during sliding or moving.
• Pad cabinet to avoid scratching surface.
Vacation & moving tips
Loading ...
Loading ...
Loading ...