Loading ...
Loading ...
Loading ...
56
Chapter
SH2 Owner’s Manual
7 Appendix
Message List
Message Descriptions
The instrument is standing by for Bluetooth pairing. While this message is shown, you cannot operate
the instrument.
Displayed while the instrument is initialized. Do not turn the power off while this message is shown.
Displayed when Musicsoft Downloader is used on the connected computer, or when an app such as
Smart Pianist is used on the connected smart device such as an iPhone and iPad. While this message
is shown, you cannot operate the instrument.
Displayed when the Character Code setting (page 55) is not appropriate for the file name of the Song
which you are selecting. Change the Character Code setting.
Displayed when the data format is not compatible with this instrument, or the data has some other
problems. This Song cannot be selected.
Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive.
Disconnect and connect the device again, then execute the operation. If this message appears
repeatedly even when there aren’t any other likely problems, the USB flash drive may be damaged.
The Song you have selected cannot be copied or deleted on this instrument. Copy or delete these
types of Songs on a computer.
The memory or the number of the files in the copy destination USB flash drive is full. Remove any
unnecessary files in the USB flash drive.
Indicates that the USB flash drive is protected.
Displayed when the memory of the USB flash drive becomes full, or the number of files and folders
exceeds the system limit.
Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to
which data has already been stored or deleted a number of times, first make sure that the device does
not contain important data, then format it (page 46) and connect to the instrument again.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized
distributor.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized
distributor.
Displayed when the current operation is completed.
The memory of the instrument or the USB flash drive is running out. We recommend that you remove
any unnecessary User Songs (page 28) to ensure sufficient memory capacity before start recording.
The operation could not be completed because the instrument’s internal memory or the USB flash
drive is nearly full. If this message is shown while recording, your performance data may not be
correctly saved.
Confirms whether each operation is executed or not.
Displayed when you try to overwrite or delete a protected Song or read-only file.
Displayed when an unformatted USB flash drive is connected. First make sure that the device does not
contain important data, then format it (page 46).
Communication with the USB flash drive has been shut down because of overcurrent to the USB flash
drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the power of
the instrument again.
Loading ...
Loading ...
Loading ...