Loading ...
Loading ...
Loading ...
52
SH2 Owner’s Manual
Listening to audio data from a smart device through this instrument
(Bluetooth Audio function)
This instrument is equipped with Bluetooth functionality. You can input the sound of the audio data saved in a
Bluetooth-equipped device, such as a smart phone, to this instrument and listen to it through the built-in
speaker of the instrument.
*Bluetooth
Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft.) employing
the 2.4 GHz frequency band. In this manual, “Bluetooth-equipped device” means a device that can transmit the audio data
saved in it to the instrument using the Bluetooth function via wireless communication; for example, smart phone, digital audio
player, etc. For proper operation, the device must be compatible with A2DP (Advanced Audio Distribution Profile).
Pairing with Bluetooth-equipped devices
If you wish to connect your Bluetooth-equipped device to the instrument via Bluetooth, the device needs to be
paired with the instrument first. Once the Bluetooth-equipped device has been paired with this instrument,
there is no need to perform pairing again.
Pairing
“Pairing” means to register Bluetooth-equipped devices on this instrument, and establish the mutual recognition for wireless
communication between the two.
NOTE
• Only one Bluetooth-equipped device can be connected to this instrument at a time (although up to 8 devices can be paired
to this instrument). When pairing with the 9th Bluetooth-equipped device has succeeded, pairing data for the device with
the oldest connection date will be deleted.
• Paring can also be operated in the Function “F8.6” (page 44).
Before using the Bluetooth function, be sure to read “About Bluetooth communications” on page 9.
1
Press the Mode button several times
until the [UTILITY] lamp lights up
in orange.
NOTE
• When the Bluetooth function of this instrument is
set to off ( Bluetooth lamp is off), paring cannot
be established when executing the paring operation. Make sure to set the Bluetooth function to on (page 53), and
then start pairing.
• When no Bluetooth-equipped device is connected, the (Bluetooth) lamp lights up in white in the UTILITY mode,
and turns off in other modes.
2
Hold down Button 3 [Func.] for three
seconds.
The instrument will enter into Pairing mode.
At the same time the (Bluetooth) lamp will
flash and a “bt” message will appear on the
display.
NOTE
To cancel the pairing, press Button 3 [Func.] while “bt” is shown in the display.
3
On your Bluetooth-equipped device, set the Bluetooth function to on and select
“YAMAHA_SH2_TA2” from the connection list.
For details, refer to the Bluetooth-equipped device owner’s manual.
After pairing is completed, the (Bluetooth) lamp will light up in blue and the “bt” message will
disappear.
NOTE
• Make sure to complete the settings on the Bluetooth-equipped device within 5 minutes. After 5 minutes elapses, the
Pairing mode ends automatically and the (Bluetooth) lamp turns off.
• If you are required to enter a passkey, enter the numerals “0000.”
Lights up in orange
Hold down for three seconds.
Loading ...
Loading ...
Loading ...