Loading ...
Loading ...
Loading ...
16
SH2 Owner’s Manual
Using headphones
Connect a pair of headphones to the [PHONES] jack. Since this
instrument is equipped with two [PHONES] jacks, you can connect
two pairs of headphones. If you are using only one pair, insert the
plug into either of these jacks.
Even when listening through headphones, you can enjoy
exceptionally realistic, natural sound by Yamaha’s advanced
technologies, Binaural Sampling and Stereophonic Optimizer. For
details, refer to page 19.
CAUTION
• Do not use the headphones for a long period of time at a high or
uncomfortable volume level, since this can cause permanent hearing
loss.
• Be careful not to catch your foot on the headphone cord.
NOTICE
Do not pull the cord of the headphones or apply excessive force on the plug. This can damage the headphones and
result in sound degradation.
Attaching the headphone hanger
Attach the headphone hanger to the bottom of the control unit with
the supplied two screws.
NOTICE
Do not hang anything other than the headphones on the hanger.
Otherwise, the instrument or the hanger may be damaged.
Auto Power Off function
To prevent unnecessary power consumption, this unit features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for 30 minutes.
NOTICE
When the instrument is communicating with other devices or the Songs are played back, the power will not be
turned off automatically. Make sure to turn off the power by pressing the [P] (Standby/On) switch when the
instrument is not in use.
Disabling Auto Power Off
Turn the power on while holding down the
lowest key (A-1). “PoF” appears on the display
and the unit starts up with the Auto Power Off
function disabled.
To turn the Auto Power Off function on or off
while the power is on, refer to page 43.
Lowest key (A-1)
Phone plug
(stereo mini)
Phillips-head (+) screwdriver
Loading ...
Loading ...
Loading ...