Loading ...
Loading ...
Loading ...
44
SH2 Owner’s Manual
Versi on
The firmware version of this unit is shown in the display.
Example: version 1.00
Audio Loop Back
Determines whether audio sound input from the connected computer or smart device (via the USB Audio
Interface function, wireless connection or Bluetooth Audio function; page 50) is output to a computer or a
smart device or not, along with the performance played on the instrument. To output the audio input sound,
set Audio Loop Back to “On.”
For example, if you want to record the audio input sound as well as the sound played on the instrument to a
computer or the smart device, set this to “On.” If you intend to record only the sound played on the instrument
to a computer or smart device, set this to “OFF.”
NOTICE
If you are using a DAW (digital audio workstation) application with this instrument, set the Audio Loop Back to off.
Otherwise, a loud sound may occur, depending on the settings of the computer or the application software.
NOTE
• The playback sound of an Audio Song on this instrument is also output to a computer or smart device when this is set to
“On,” while the sound is not output when this is set to “OFF.”
• With Audio Recording on this instrument, the audio input sound from the connected computer or smart device is recorded
when this is set to “On,” while the sound is not recorded when this is set to “OFF.”
Bluetooth On/Off
Turns on or off the Bluetooth function. For details, refer to “Turning the Bluetooth function on/off ” on
page 53.
Pairing
Register the Bluetooth-equipped device on this instrument. While “F8.6” is shown in the display, press
Button 3 [Func.] to enable the Pairing mode on the instrument. After that, make settings on the Bluetooth
equipped-device. For detailed instructions, refer to step 3 in “Pairing with Bluetooth-equipped devices” on
page 52.
Setting range
On, OFF
Default setting
On
Loading ...
Loading ...
Loading ...