Loading ...
Loading ...
Loading ...
CHARGING THE VACUUM CLEANER
• Auto mode: After completing cleaning, the vacuum cleaner
automatically returns to the docking station for charging.
• Manual mode: In pause state, you can press the " " button to
activate the "Return to docking station" mode. When the vacuum
cleaner is being charged, the power indicator blinks.
NOTE: If the vacuum cleaner fails to find the docking station, it
automatically returns to the starting point. In this scenario, you will
need to manually place the vacuum cleaner back to the docking
station.
Faulty state:
If the vacuum cleaner encounters a fault while working, the power
indicator blinks quickly in red, and a voice prompt is generated.
For details about troubleshooting method, please refer to the
"Troubleshooting" section.
NOTE:
• In faulty state, if no operation is performed in 10 minutes, the
vacuum cleaner automatically enters sleep mode.
• In faulty state, if the vacuum cleaner returns to the docking
station for charging, the current cleaning task is stopped.
RESET THE Wi-Fi SETTINGS
If your mobile phone fails to connect to the vacuum cleaner due to
reasons such as change of router settings and password forgotten,
re-pair the vacuum cleaner with the mobile phone according to the
Wi-Fi connection instructions.
NOTE: If the vacuum cleaner is in wait-to-connect state for more
than 2 minutes, its Wi-Fi function is automatically disabled. To
reconnect the vacuum cleaner to your mobile phone, reset the
Wi-Fi settings.
PIN N GO
You can use the mobile app to specify a target point on the map.
The vacuum cleaner will automatically plan the route and move
to the specified point. If you specify a target point in the app
when the vacuum cleaner is in standby or pause state, the
vacuum cleaner will clean 1.6mx1.6m square zone centered on
this point. After cleaning, the vacuum cleaner will automatically
return to the starting point and stop working.
NOTE: If you activate partial cleaning when the vacuum cleaner
is in pause state, the current cleaning task will be stopped.
In pause state, you can press the " " button to
1.6m
1.6m
Usage Instruction
14
Loading ...
Loading ...
Loading ...