Loading ...
Loading ...
Loading ...
POWER ON & OFF THE VACUUM CLEANER
Tap and hold the " " button for 3 seconds to power ON the vacuum
cleaner. The power indicator is ON and the vacuum cleaner enters
the standby state.
When the vacuum cleaner is in a static state, press and hold the " "
button for 3 seconds to power off the machine and stop the current
cleaning task.
NOTE: When the vacuum cleaner is in charging state it cannot be
powered off.
START CLEANING
Press the " " button to start cleaning. The vacuum cleaner
dynamically plans the cleaning route according to the map generated
after scanning and completes cleaning of different zones one by one.
In each zone, the vacuum cleaner first sweeps the floor along the
wall, and then moves in zigzag mode to clean the remaining part of
the zone in an orderly and efficient manner.
NOTE:
• If the power is too low, the vacuum cleaner will not start clean-
ing. Please ensure to charge the vacuum cleaner before starting it.
• Before using the vacuum cleaner, tidy up all kinds of wires on the
ground (including the power cord of the docking station). Other-
wise this may result in the vacuum cleaner to drag the wires while
cleaning, which may cause power failures of other electric
appliance or damage to items or wires.
• If the cleaning area is less than 2 square meters, the vacuum
cleaner will clean the area twice by default.
• If the power is insufficient in the cleaning process, the main unit
will automatically return to the docking station for charging. After
the power is sufficient, the main unit will automatically return to the
interrupted point to continue cleaning (ensure that you have
enabled the resumable cleaning function).
PAUSE CLEANING
If you need to add water to the water tank or wash the mopping
cloth while the vacuum cleaner is working, press the " " button to
pause. Once you are done adding the water/changing the mopping
cloth press the " " button to resume cleaning or press the " "
button to return to the docking station and stop the current
cleaning task.
NOTE: In the pause state, if the vacuum cleaner returns to the
docking station for charging, the current cleaning task is stopped.
SLEEP MODE
If no operation is performed within 10 minutes, the vacuum cleaner
automatically enters sleep mode, and the power indicator blinks
every few seconds. In sleep mode, you can press any button to
wake up the vacuum cleaner.
NOTE: • When the vacuum cleaner is being charged at the
docking station, it cannot enter the sleep mode.
• If the vacuum cleaner is in sleep mode for more than 12 hours,
the vacuum cleaner automatically powers off.
Zone 1: Cleaned
Zone 2: Cleaned
Zone 3: Cleaning
Zone 4: To be cleaned
Press the " " button to start cleaning. The vacuum cleaner
When the vacuum cleaner is in a static state, press and hold the " "
cloth press the " " button to resume cleaning or press the " "
cloth while the vacuum cleaner is working, press the " " button to
Tap and hold the " " button for 3 seconds to power ON the vacuum
cloth press the " " button to resume cleaning or press the " "
Usage Instruction
13
Loading ...
Loading ...
Loading ...