Loading ...
Loading ...
Loading ...
86
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ] mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Congure the setting.
● Press the [ ] button, choose [ ] in the
menu, and adjust the setting by either
pressing the [ ][ ] buttons or turning
the [ ] dial (
=
28).
● Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium,
[ ]: Maximum
● You can also set the ash level by accessing MENU (
=
29)
and choosing [
] tab > [Flash Settings] > [Flash Output].
● You can set the ash level in [
] or [ ] mode by accessing
MENU (
=
29) and choosing [ ] tab > [Flash Settings] >
[Flash Mode] > [Manual].
● You can also access the [Flash Settings] screen (
=
29)
when the ash is up by pressing the [
] button and immediately
pressing the [
] button.
● After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specied
shutter speed and aperture value. However, screen brightness
remains the same when the ash is up and the mode is set to [
].
● To have the setting that is not chosen in step 2 (whether shutter
speed or aperture value) automatically adjusted to obtain
standard exposure, hold the shutter button halfway and press the
[
] button. Note that standard exposure may not be possible with
some settings.
● With shutter speed of 1.3 seconds or slower, ISO speed is xed
at [80].
● [
] Auto mode cannot be used in [ ] mode.
● [ ]: Manual
● Calculation of standard exposure is based on the specied
metering method (
=
71).
Loading ...
Loading ...
Loading ...