Loading ...
Loading ...
Loading ...
Maintenance and Troubleshooting
68
6.2. Maintenance
6.2.1. Pedals
The pedals may become loose after workouts. Check the
pedals before each workout and tighten them if necessary to
avoid injury. Turn the right pedal clockwise and the left pedal
counterclockwise to tighten. Check all bolts and screws
frequently to avoid injury.
6.2.2. Moving the Bike
The bike has two small wheels at the front to assist with moving
it if needed. To move the bike, lift it at the rear, then roll on front
wheels to desired location. See page 12 and page 13 for the
location of the small wheels
6.3. Self-Diagnostics
The bike is equipped with
on-board self-diagnostics.
If the bike experiences any
errors during operation, an
error message is displayed.
You can run self-
diagnostics to get further
information on the error by
pressing ENTER.
When you choose the option to enter diagnostics you will be
prompted with a warning screen. After reading it, take your feet
off the pedals and press ENTER.
The bike will systematically test individual components. During
some of the tests, you will be prompted with simple “Yes or No”
questions to assist with the diagnosis. Answer the questions
when prompted.
When the Self-Diagnostics has completed all of the tests, it will
display one of the two messages along the bottom: “No Errors
Detected”, or “Error Detected, Contact Service Provider”.
Contact your Dealer or go to www.landice.com and click on
Service Locator to find a provider in your area.
The self-diagnostics mode can be accessed manually by
selecting the Self-Diagnostics option from the Hidden Menus
(see page 69).
Loading ...
Loading ...