Loading ...
Loading ...
Loading ...
29
3. Upright Bike Assembly
3.1. Tools Needed
The Landice upright bike is shipped with tools and hardware
necessary for assembly and installation. A sharp utility knife
and/or diagonal cutters will aid in removing plastic strapping.
The following tools are needed for assembly:
• 13-16 mm open end combination wrench
• Cross head #2 (Phillips) Screw Driver
• #8 Hex Key Wrench
• #6 Hex Key Wrench
• #5 Hex Key Wrench
• #4 Hex Key Wrench
• Optional: 5/8 inch open end or adjustable wrench for leveling
bike if necessary (not included)
3.2. Unpacking
Unpacking and installation of the bike should be done by a
qualified technician. The packaged bike is heavy and weighs
235 lb (107 kg).
WARNING
To avoid injury, use caution when moving
and lifting the bike during unpacking and
assembly. Two people are recommended
when removing bike base from shipping
pallet.
AVERTISSEMENT
Pour éviter toute blessure, faites attention
lors du déplacement et du levage du vélo
lors du déballage et de l'assemblage. Deux
personnes sont recommandé lors du retrait
socle de vélo de la palette d'expédition.
CAUTION
Be careful! Straps are under tension.
ATTENTION
Faites attention! Les sangles sont sous
tension.
Loading ...
Loading ...
Loading ...