Loading ...
Loading ...
Loading ...
Recumbent Bike Assembly
23
Figure 2-1. Upright Tube Installation
3. Connect both cables from recumbent bike base to
intermediate harnesses located inside the upright tube.
Connectors are keyed, do not force connectors together or
damage may result (Figure 2-2).
4. Carefully tuck wiring inside of plastic shroud and install
finishing cover located inside the accessory box with (2)
#25 cross head screws as shown.
Figure 2-2. Harness Connection and Finishing Cover
M10x20 socket
head cap screws
(4x)
M10 split
lockwashers
(4x)
Cross head
screw (2x)
Finishing
Cover
Cables
Loading ...
Loading ...
Loading ...