Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
86
Before establishing the fresh water
connection, ensure that the appli-
ance is disconnected from the power
supply.
The fresh water connection is at the
back of the appliance, at the bottom.
The connection parts included with the
appliance permit the connection of vari-
ous water lines (water line not supplied).
Do not connect old water lines that
have been used before.
The solenoid valve has a metric
R3/4 connection thread.
Remove the cap from the solenoid
valve.
Insert the adapter into the union
nut.
Risk of damage!
Do not insert the water filter the
wrong way around, as this can cause
damage.
Insert the water filter with the de-
pression facing downward toward the
adapter.
Risk of damage!
Do not overtighten the union nut, as
this can cause damage.
Connect the union nut to the sole-
noid valve, and tighten it.
If you want to divert the water line by
90°, screw on the elbow.
In case of a water line with a 1/4"
thread:
Connect the water line (e.g., cop-
per) to the adapter or elbow us-
ing the clamping ring and nut.
In case of a water line with a 7/16"-24
UNS thread:
Connect the water line directly to
the adapter or elbow (a clamp-
ing ring and nut are not re-
quired).
Loading ...
Loading ...
Loading ...