Loading ...
Loading ...
Loading ...
Switching on and off
19
Before first use
Packaging material
Remove all packaging material from
the inside of the appliance.
Removing the protective film
Carefully remove the protective film.
Cleaning the refrigerator
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Clean the ice cube maker: after se-
lecting the “Rinse ice cube maker”
setting; the ice cube maker and the
water supply pipework are rinsed au-
tomatically with water.
Operating the appliance
A light touch of the finger on the sen-
sors is all that is required to operate this
appliance.
A tone will sound each time a sensor is
touched. You can deactivate this if you
wish (see “Selecting additional settings
– Acoustic signals”).
Switching on the appliance
To enable the internal temperature to
get sufficiently cold, allow the appli-
ance to run for a few hours before
placing food inside it.
Once the appliance is connected to the
electricity supply, the power supply
symbol will soon appear in the dis-
play.
Touch the On/Off button.
The appliance will start cooling. The
power connection symbol goes out
and the temperature appears in the dis-
play.
The temperature display and the alarm
symbol will flash at the same time
until the required temperature is
reached. If the current temperature is
above 32°F (0°C), two bars will flash in
the display.
When the appliance door is opened, the
interior lighting comes on and the LED
lighting becomes brighter until it
reaches its maximum brightness.
Loading ...
Loading ...
Loading ...