Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
75
Remove the cover.
Loosely fit the connecting bracket
using the screws.
Tip: Do not tighten the screws, to allow
for the position of the connecting
bracket to be adjusted.
Push the contact component onto
the fixing bracket.
Loosely fit the securing bracket
using the screws.
Tip: Do not tighten the screws, to allow
for the position of the connecting
bracket to be adjusted.
Carefully remove the protective film
from the sealing strip.
Stick the sealing strip onto the
side of the appliance on which the
door will open, flush with the front.
1. Align the sealing strip with the bot-
tom edge of the top fixing bracket.
2. Stick it down along its entire length.
Loading ...
Loading ...
Loading ...