Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
77
Important for cabinetry with door fit-
tings (such as stubs and seals).
Take the dimensions of the fittings
into account.
Check to make sure there is a gap all
round of 15/8" (42mm) to the front
edges of the door fittings.
Pull the appliance forward by the ap-
propriate dimension.
Tip: If possible, remove the door fittings
and push the appliance into the niche
until all securing brackets at the top and
bottom are touching the front edge of
the cabinet side wall.
Align the appliance on both sides via
the adjustable feet so that it stands
level.
Securing the appliance in the niche
Push the appliance onto the cabinet
wall on the hinge side.
Screw the particle board screws
through the hinge plates at the top
and bottom to secure the appliance
to the housing unit.
Loading ...
Loading ...
Loading ...