Loading ...
Loading ...
Loading ...
The correct temperature
22
Setting the temperature
Use the two sensors below the dis-
play to set the temperature.
When you touch the sensor
- The temperature decreases.
- The temperature increases.
The temperature value flashes while the
temperature is being set.
The following information appears in the
display when the sensors are touched:
- With the first touch: The last temper-
ature set flashes.
- Each subsequent touch: The temper-
ature changes in 1°F increments.
- Keeping your finger on the sensor
changes the temperature continu-
ously.
Approximately 5seconds after the last
time a sensor was touched, the actual
temperature inside the appliance will
automatically be displayed.
Or
Touch the OK button to confirm your
selection.
If you have adjusted the temperature,
wait for approximately 6hours if the
appliance is not very full and for ap-
proximately 24hours if the appliance
is full before checking the temperature
display. It will take this long for an accu-
rate reading to be given.
If the temperature is still too high or
too low at the end of this time, adjust
it again.
Temperature range
The temperature can be adjusted from
5°F to -18°F (-15°C to -28°C).
Loading ...
Loading ...
Loading ...