510T ASSEMBLY MANUAL

Loading ...

SPECIFICATIONS

Power Requirements: 120V 220V

Operational Voltage: 120V AC, 60Hz 220V - 240V AC, 50/60Hz

Operating Current: 15 A 8 A

Maximum User Weight: 125 kg (275 lbs)

Total Surface Area (footprint) of equipment: 15,848 cm

Maximum Inclined Deck Height: 40 cm (15.8 inches)

Machine Weight: 70.3 kg (155 lbs)

Sound Emission: Less than 70 db average without load. Noise emission

under load is higher than without load.

DO NOT dispose of this product as refuse. This product is to be

recycled. For proper disposal of this product, please follow the

prescribed methods at an approved waste center.

90.3 cm

(35.6”)

175.5 cm

(69.1”)

100.3 cm

(39.5”)

144 cm

(56.7”)

153 cm

(60.2”)

Before Assembly

Select the area where you are going to set up and operate your machine.

For safe operation, the location must be on a hard, level surface. Allow a

minimumworkoutareaof212.3cmx376.2cm(83.6”x148.1”).Besurethat

theworkoutspaceyouareutilizinghasadequateheightclearance,taking

intoconsiderationtheheightoftheuserandthemaximuminclineofthemachine.

Basic Assembly

Follow these basic points when you assemble

your machine:

• Read and understand the “Important Safety

Instructions” before assembly.

• Collect all the pieces necessary for each

assembly step.

• Using the recommended wrenches, turn

the bolts and nuts to the right (clockwise) to

tighten, and the left (counterclockwise) to

loosen, unless instructed otherwise.

• When attaching 2 pieces, lightly lift and look

through the bolt holes to help insert the bolt

through the holes.

• Theassemblyrequires2people.

• Do not use any power tools for assembly.

Machine Mat

The Schwinn™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of

protectiontoyouroor.Therubbermachinematprovidesanon-slip,rubbersurfacewhichlimitsstaticdischargeand

reduces the possibility of display errors. If possible, put your Schwinn™ Machine Mat in your selected workout area before

you begin assembly.

To order the optional machine mat, contact Customer Service (if purchased in US/Canada) or your local distributor (if

purchased outside US/Canada).

3.76 m ( 148.1” )

2.12 m

( 83.6” )

( 79” )

0.6m

( 24” )

0.6m

( 24” )

Loading ...

ASSEMBLY MANUAL - Page 9