Loading ...
Loading ...
Loading ...
21
7. Make sure that the locking mechanism is engaged. Carefully pull back on the Walking Deck and make sure that it does
not move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become
unstable or fall.
Do not connect the power cord or try to operate the treadmill in the folded position.
8. Stand to one side of the treadmill. Place your front foot so it pins the Base
Assembly. Grasping the Side Handrail, carefully pivot the treadmill rearward
until it is balanced fully on the transport wheels. Be sure not to pivot the ma-
chine too far. Hold the treadmill in the balanced position.
This step may require two persons on each side of the treadmill.
The treadmill is heavy and can be awkward. Make sure that your
own physical strength is capable of pivoting the machine.
Always wear fully enclosed shoes when moving this machine. Do
not move the machine with bare feet or only wearing socks.
Do not use the Console or lifted Walking Deck to pivot or move the
treadmill. Injury to you or damage to the machine can occur.
Keep clear of the movement path of the lifted Walking Deck.
9.GraspingtheSideHandrailandthefrontoftheUpright,safelyrollthe
treadmill to the desired location.
The treadmill is heavy and can be awkward. Make sure that
your own physical strength is capable of moving the machine.
Place the machine on a clean, hard, level surface, free from
unwanted material or other objects that may hamper your
ability to move freely. A rubber mat should be used below the
machine to prevent the release of static electricity and protect
your ooring.
Do not put objects in the path of the walking deck when low-
ered.
NOTICE: Move the machine carefully so that it does not hit
other objects. This can damage the Console opera-
tion, the treadmill, or the area around the machine.
10. Safely lower the treadmill into the desired position. Be sure there is
adequatespaceforthemachinebeforeloweringit.
11. Prior to use, refer to the “Unfolding the Machine” procedure in this manual.
Loading ...
Loading ...
Loading ...