Loading ...
Loading ...
Loading ...
1
Getting Started
● If you are using AA-size bat-
teries, ensure that battery
polarities (+ and -) are as
shown in the figure at right.
Close the battery compart-
ment cover by pressing it
down onto the batteries and
sliding it in the opposite
direction to the arrow on the
cover.
● Pressing on the edge of the
battery compartment cover
will make it more difficult to
close.
● The cover is locked in the
closed position.
Slide the battery compart-
ment lock towards the
icon.
7
6
30
Loading the batteries
• CR-V3 lithium battery packs cannot be charged.
• Do not attempt to remove the labels from CR-V3 lithium battery packs.
Where the terminals are covered with a protective sticker (insulating cover),
peel off that sticker only.
• The performance of alkaline batteries varies greatly and is particularly poor
at low temperatures. The use of lithium battery packs or NiMH batteries is
recommended.
• Do not use manganese batteries. Please read the notes on handling bat-
teries. (P.8)
• Soiling on the terminals inside the battery compartment will shorten the life
of the batteries considerably. Take care not to touch the inside of the battery
compartment when removing the batteries.
• If the camera is left for 1 hour with the batteries removed, all the internal set-
tings revert to the default settings.
7
If you are using AA-size batteries.
5
6
Loading ...
Loading ...
Loading ...