Loading ...
Loading ...
Loading ...
6
English
Installation and
Setup Manual
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. Do not expose this apparatus to dripping or
splashing and ensure that no objects filled
with liquids, such as vases, are placed on the
apparatus.
16. To completely disconnect this apparatus from the
AC Mains, disconnect the power supply cord plug
from the AC receptacle.
17. The mains plug of the power supply cord shall
remain readily operable.
18. Do not expose batteries to excessive heat such as
sunshine, fire or the like.
The lightning flash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
19. When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorised
substitutions may result in fire, electric shock or
other hazards.
20. For continued protection against fire hazard, use
fuses only of the correct type and rating. Mains
fuses are located inside the appliance as well as
on its back panel. Replacement of the internal fuse
should be entrusted to an authorised operative.
User-replaceable fuse types are shown in the
specification.
21. Isolation of the appliance from the power supply is
by means of removal of the power cord from the
rear of the appliance or removal of the power cord
from the wall power outlet. Either the wall outlet
or the rear of the appliance must remain freely
accessible at all times while the apparatus is in
use.
22. This product should be operated only from the
type of power source indicated by the marking
adjacent to the power cord entry. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
23. Do not overload wall outlets, extension cords or
integral convenience receptacles, as this can result
in a risk of fire or electric shock.
24. Magnetic fields – The product creates a stray
static magnetic field. Do not place any object
that may be damaged by this magnetic field
(eg cathode ray tube televisions or computer
monitors, audio and video tapes and swipe cards)
within 0.5m (2 feet) of the appliance. The appliance
may cause distortion of cathode ray tube images
beyond this distance. LCD and Plasma screens
are not affected.
7702 ISW-4 manual.indd 6 6/4/09 10:36:43
Loading ...
Loading ...
Loading ...