Loading ...
Loading ...
Loading ...
English38
Installation instructions
Installation instructions
Verifying the Setup
ONOFF
Main Power
Switch Detail/
Hood Bottom
Filter
Main Power
Switch
Grease
Channel
Filter
Back
Bottom
Front Filter
Clip
Grease
Channel
Lights
1. Turn OFF the main power switch.
2. Turn power ON at the circuit-breaker
panel or fusebox.
3. Turn ON the main power switch.
The button panel flashes several times
during startup.
4. (Taking care not to scratch the grease
channel o
r other surfaces) Insert the
filters:
a. Set the front edge into the clip, and
press forward.
b. Lift the rear edge above the grease
channel.
c. Set the filter rear edge on the grease
channel.
5. On the hood feature-button panel, press
Lights to verify that all lights turn on.
6. Press Lights again to turn the lights to the Low setting.
7. Press
Lights again to turn the lights off.
8. Press POWER to verify that one fan-speed indicator turns on and the fan is on at low
speed.
9. Press Low/Med/High/Boost: to verify that the fan speed increases each time.
10. Press POWER again to turn the fan OFF.
Loading ...
Loading ...
Loading ...