Loading ...
Loading ...
Loading ...
English 35
Installation instructions
N1
L1
Neutral (white)
Hot (black)
To junction
Box
Power
Terminals
in Hood
Main Power
Switch Detail
Filter
Wing Nut
Main Power
Switch
Grease
Channel
Filter
Ground
Screw
Back
Bottom
3. With the provided green screw, attach
the ground wire to the ground screw
(next to the main power switch inside
the hood above the filters).
IMPORTANT: Use a #10 O-ring at the
end of the ground wire.
4. Remove the wing nut on the main
power switch plate, then remove the
plate to access the terminal block and
connect the power wires.
5. Insert the white wire and black wire
through the plastic hole protector, and
tightly connect the wires to their
corresponding terminals.
Junction box
Wire nut
(3 places)
UL/CSA-approved
NEMA strain relief
To range hood
To house circuit
breaker or fusebox
WHITE
WHITE
BLACK
BLACK
GREEN
GREEN
6. Connect the hood wiring to an electrical
junction box or circuit breaker.
WARNING
• Do not ground the circuit to a gas line
or hot-water pipe.
• Insulated water lines must be jumped
to assure continuity to the ground. (See
the diagram on the next page.)
Loading ...
Loading ...
Loading ...