Loading ...
Loading ...
Loading ...
English 33
Installation instructions
Hanging the Hood
WARNING
Hanging the range hood requires two people. Do not lift the hood unassisted.
IMPORTANT: Take care not to scratch/damage the hood.
IMPORTANT: Hanging slots in the hood back engage the holding brackets to support the
hood temporarily during installation.
Bracket
attached to
wall
Bracket
slot (on
hood
back)
Adjacent
Cabinetry
Adjacent
Cabinetry
1. Remove the plastic film from the hood.
2. Lift, and slip the hood onto the holding
brackets through the hanging slots in
the hood back.
3. Adjust the hood into its final position.
4. Mark the spot by drawing in a
mounting hole in the back of the
hood. (This is where a screw will hold
the hood to the wall stud or concrete
anchor.)
Hanging
slots
Mounting holes
5. (If needed) Mark the top of the hood if
the configuration calls for the hood to
be secured at the top.
6. Remove the hood from the wall.
7. Drill the pilot or anchor holes. (If using
anchors, insert them into the anchor
holes.)
8. Re-engage the hood to the holding
brackets.
9. Adjust and anchor the hood to its final
position.
Loading ...
Loading ...
Loading ...