Loading ...
Loading ...
Loading ...
English 27
Installation instructions
Blower Rotation (Rear Exhaust)
IMPORTANT: Perform this procedure before you hang the hood.
WARNING
• Install the hood only if the electrical service meets the hood’s specifications; the owner
shall verify proper installation.
• Observe all local codes during installation. Contact your local building department for
details.
• The hood must be installed by a qualified technician with sufficient personnel to assist
with lifting and anchoring the hood.
A B
Top
Exhaust
Rear
Exhaust
The blowers (fans) can be rotated so air
vents out the back of the hood.
The hood comes from the factory in the
top-exhaust configuration; if you intend to
use that configuration, you do not need to
alter the blower’s position.
If, however, the hood will be installed for
rear exhaust, th
e blowers must be rotated
so exhaust vents through the rear.
The images in this section were chosen to illustrate the intended information and may not
exactly represent the hood being installed.
Tools Needed
5/16” Nut driver
Cable ties
• AHT10 Transition kit (option), metal screws, foil tape
• 10” ducts, ducting material
8” Duct and ducting materials
Phillips screwdriver
Loading ...
Loading ...
Loading ...