Loading ...
Loading ...
Loading ...
9
Installation
Getting through narrow spaces
If refrigerator will not fit through an
entrance area, doors can be removed.
Check first by measuring the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord
is unplugged from the wall outlet.
2 Remove any food from the door
shelves and close the doors.
To remove the refrigerator doors:
1 Open doors to 90°.
2 Remove all five Phillips
TM
screws from
top hinge cover and lift up.
Phillips Screws
Top
Hinge
Cover
5 Pull up on water line gently to remove
from door.
Waterline
3 Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
4 Disconnect electrical harness running
from door to hinge cover.
6 Remove three 8mm bolts from both
top hinges. Lift doors up off lower
hinges and carefully set aside.
x2
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and cause
personal injury, or damage to the doors or
handles.
NOTE
Approximately four feet of water tube will
be pulled from the refrigerator door.
NOTE
Use care while pulling the water tube
from the door to be sure that tube does
not kink.
Loading ...
Loading ...
Loading ...