Loading ...
Loading ...
Loading ...
12
Installing Door Handles
Door Handle Mounting Instructions
1 Remove handles from carton and any other protective packaging.
2 Position fresh food handle end caps over upper and lower pre-installed shoulder
bolts (A) that are fastened into door, ensuring the holes for the set screws are facing
towards the opposite door.
3 While holding handle firmly against door, fasten upper and lower Allen set screws
(B) with supplied Allen wrench.
4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws
are facing towards the first door.
Mounting Refrigerator Handles
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.
NOTE
When tightening the Allen set screws, it
is imperative that force be applied to the
longer arm of the Allen wrench supplied
in the handle packaging.
NOTE
All set screws should be tightened
so the screw is below the surface of
the handle. The handles should be
drawn tight to doors/drawer with no
gaps. Opening the opposite door
while tightening the Allen screw makes
installation easier.
The door handle may loosen over time or if
it was installed improperly. If this happens,
tighten the set screws on the handles.
Loading ...
Loading ...
Loading ...