Loading ...
Loading ...
Loading ...
Maintenance of the remote control in water or at a
waterfront
Always clean the remote control with water within 60 minutes of use, and do not remove the belt
before cleaning is finished. Sand or water may get inside where it cannot be seen, and will
degrade water-proof performance if not rinsed out.
Allow the remote control to sit in pure water poured into a cleaning bowl for about 5 minutes.
Then, gently shake the remote control and press each button under the water to clean away any
salt, sand or other matter lodged around the buttons.
After rinsing, wipe away any drops of water with a soft cloth. Allow the remote control to dry
completely in a shady location with good ventilation. Do not blow dry with a hair dryer as there is
a risk of deformation and/or degraded waterproof performance.
Wipe away any drops of water or dust with a soft dry cloth.
Attach the remote control to the cradle when the remote control is completely dry.
The remote control body may become discolored if it comes into contact with sunscreen or suntan
oil. If the remote control comes into contact with sunscreen or suntan oil, quickly wipe it clean.
Do not allow the remote control to sit with salt water inside it or on its surface. This may lead to
corrosion or discoloration, and degradation of the waterproof performance.
[81] Information
Battery pack
Battery pack
On charging the battery pack
Charge the battery pack before using the remote control.
We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C
(50°F to 86°F) until the CHG (Charge) lamp turns off. The battery pack may not be effectively
charged in temperatures outside this range.
The CHG (Charge) lamp may blink during charging in the following situations:
Battery pack is damaged.
The temperature of the remote control is low. Put it in a warm place.
The temperature of the remote control is high. Put it in a cool place.
Effective use of the battery pack
Battery pack performance decreases at a low ambient temperature lower than 10°C (50°F). In
cold places, therefore, the operational time of the battery pack is shorter.
Remaining battery charge
If the battery pack runs out quickly even though the remaining charge indicator is high, fully
charge the remote control again. The remaining charge indicator will be then displayed correctly.
Note that it may not be displayed correctly in the following situations:
The remote control is used for a long time at high ambient temperature.
The remote control is left fully charged.
The remote control is used heavily.
On battery pack life
The battery pack has a limited life. Battery capacity decreases over time and through repeated
use. If decreased usage time between charges becomes significant, the battery pack life has been
shortened. In this case, contact your Sony dealer.
Loading ...
Loading ...
Loading ...