Loading ...
Loading ...
Loading ...
Note
Time code/user bit can be set only for the movie mode.
When the remote control is not connected to the camera via Wi-Fi, the camera settings cannot be changed.
Hint
(Selects the time code recording method)
: Records the time code in drop frame.
: Records the time code in non-drop frame.
*
When
the image quality is set to 24p
When the NTSC/PAL switching is set to
(Sets the time code count up format)
: The time code advances only while recording XAVC S movies. It is recorded
sequentially from the time code on the image recorded last time.
: The time code advances sequentially, regardless of the operation of the
camera.
(Sets the time code to be recorded)
: The newly set-up time code is recorded on recording media.
: The last time code of the previous recording is read out from the recording media
and the new time code is recorded sequentially from the last time code.
(Sets the user bit)
1. Press the UP button or DOWN button to select 2-digit numbers, then press the REC/ENTER
button.
2. Repeat step 1 until you set four 2-digit numbers, then return to the previous MENU.
The user bit can be selected within the following range.
00 00 00 00 - FF FF FF FF
(Initializes the user bit)
Reset is executed when you select
, then press REC/ENTER button.
(Sets the recording time of the user bit)
: Does not record the time as a user bit.
: Records the time as a user bit.
In the following situations, the time code is fixed to .
*
Loading ...
Loading ...
Loading ...