Loading ...
Loading ...
Loading ...
IV
Precautions before Using the Printer:
1.Read and understand all instructions.
2.Familiarize yourself with the basic principles associated with operating electrical appliances.
3.Comply with all warnings and instructions marked on the equipment or specified in th
manual supplied with the equipment.
4.If the operating instructions conflict with the safety information, please refer back to
the safety information, as you may have misunderstood the operating instructions. If you
cannot resolve the conflicts, please call the Customer Service Hotline or contact a servic
representative for help.
5.Before cleaning the equipment, remove the power cord from the AC power supply outlet.
Do not use liquid or aerosol cleaners.
6.Please make sure that the equipment is put on a stable desktop surface to avoid serious
damage caused by the falling of the equipment.
7.Do not put the equipment near a radiator, an air conditioner, or a ventilation pipe.
8.Do not put any articles on the power cord. Do not put the equipment at the place where its
power cord could be stepped on by people.
9.Outlets and extension cords must not be overloaded. This may reduce performance and
could result in fire or electric shock.
10.Do not allow pets to chew on the AC power cord or the computer interface cable.
11.Do not allow sharp objects piercing equipment slot, so as to avoid contact with the high-
voltage device, which otherwise may result in fire or electric shock. T
ake care not to spill
liquids onto the equipment.
12.Do not disassemble the equipment so as to avoid the risk of electric shock. Necessary
repairs may only be carried out by professional maintenance personnel. Opening or removing
the cover could result in an electric shock or other potential hazards. Incorrect disassembly
and assembly could also result in an electric shock during future use.
13.If any one of the following occurs, disconnect the equipment from the computer and pull
out the power cord from the AC wall socket and contact a qualified member of the service
personnel for maintenance:
• Liquid has been spilled into the equipment.
• The equipment has been exposed to rain or water.
• The equipment falls, or the cover is damaged.
• Significant changes in the equipment s performance.
14.Only adjust the control mentioned in the instructions. Incorrect adjustment of other controls
may result in damage and mean that professional maintenance personnel need to spend
more time fixing it.
Precautions
Loading ...
Loading ...
Loading ...