Loading ...
Loading ...
Loading ...
34
1
Getting started
Turning the power on/off
3 Turn the mode dial until the mode
you want to use is aligned with the
red line.
g“Shooting mode” (P.59)
4 Turn the power switch so that ON
is aligned with the ( mark.
• When the mode dial is set to a mode
other than q, the camera turns on in the
shooting mode. The monitor turns on and
the lens extends.
• When the mode dial is set to q, the
camera turns on in the playback mode
and the monitor turns on.
• You can also change the mode with the
camera turned on.
(Power off
1 To turn the power off, turn the power switch
so that OFF is aligned with the ( mark.
• The monitor turns off, the lens retracts and the power
turns off.
2 Turn the monitor towards the camera and
close it.
• To protect the monitor, you are recommended to
keep it closed when the camera is not in use.
TIPS
• To reduce battery consumption, the camera automatically enters
the sleep mode after about 3 minutes of non-operation. The
camera activates again as soon as you touch the shutter button or
zoom lever.
• To reduce battery consumption, the camera turns off automatically
and the lens retracts after about 4 hours of non-operation. To
resume operation, turn the camera on again.
• If the camera is subjected to strong vibration or impact while it is
turned on, it may turn off momentarily and the date and other
settings return to the factory default settings.
Mode
dial
Power
switch
Note
Loading ...
Loading ...
Loading ...