Loading ...
Loading ...
Loading ...
231
Troubleshooting
11
Miscellaneous
Possible cause Corrective action Ref. Page
Part of the picture is too dark
The lens was partly
blocked by your
finger or the strap.
Hold the camera correctly, keeping your fingers
and the strap away from the lens.
P.41
Halation produces unnatural colors in the picture.
This may be caused
by excessively bright
ultraviolet light on the
subject, such as
sunlight shining
through the leaves of
trees, window frames
in bright light at night,
reflection of metal in
direct sunlight, etc.
• Use a specified UV filter. As this may upset the
overall color balance, it should only be used in
the conditions described on the left.
• Process the picture using a graphics
application (Photoshop, Paint Shop Pro, etc.).
For example, after picking up unnatural colors
with a syringe tool, etc. you can select color
areas, and try color conversion or saturation
adjustment. For details, refer to the manual for
the graphics application you are using.
—
Pictures you have taken do not appear on the monitor.
The power is off. Set the mode dial to q, then turn the power on. P.139
The camera is in the
shooting mode.
Press the QUICK VIEW button or set the mode
dial to q.
P.139, 140
There are no pictures
on the card.
NO PICTURE appears on the monitor. Record
pictures.
—
There is a problem
with the card.
Refer to “Error codes”. P.223
The camera is
connected to a TV.
The monitor does not function when the AV cable
is connected to the camera.
P.152
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Display pictures with 9 and press 0 to cancel
protection.
P.159
No picture is displayed on the TV when connected to the camera.
The video output
signal is incorrect.
Set the video output signal according to the region
where used.
P.194
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P.152
Loading ...
Loading ...
Loading ...