Loading ...
Loading ...
Loading ...
8 INSTALLATION OF THE APPLIANCE
INSTALLATION (continued)INSTALLATION (continued)
Cabinet construction for built in oven
For the best integration within a kitchen, install this
appliance in a cupboard that gives a flush fit with the
surrounding cupboard fronts. A recess of 20mm is ideal.
NOTE: Your appliance must be mounted on a horizontal
surface for the full width and depth of the product.
NOTE: A ventilation slot 20mm wide is required at the
rear of the base of the cabinet floor.
Oven dimensions
20mm
900mm
580mm minimum
Infill panel max.
16mm thickness
20mm
(see NOTE)
cupboard
door
100mm
max.
895mm
552mm
572mm
586mm
596mm
9INSTALLATION OF THE APPLIANCE
NOTE: If a powerpoint is fitted it must be accessible with
the appliance installed.
Underbench installation
Your underbench oven looks best when the control
panel is directly under the benchtop. An upper infill
panel may be added if the cooktop placed above the
benchtop is too deep.
Vertical cabinet installation
The oven can be built into a vertical cabinet in the
same manner as an underbench. The required cavity
dimensions are the same and the product is secured
to the cabinet in the same way.
900mm
600mm
580mm
876mm
Mounting holes
20mm
slot
*20mm
see note
below
*Refer to cooktop installation instructions for
required clearance between cooktop and oven.
Loading ...
Loading ...
Loading ...